Cisco Aironet 350 Series Windows Setup
- Make sure that the Cisco Aironet 350 card is not in the computer.
- Go to the Cisco web site.
- Download the NDIS driver WIN95v697.exe for Windows 95, WINNTv697.exe for Windows NT 4.0, WIN98-2Kv664.exe for Windows 98 or WIN98-2Kv697.exe for Windows 2000 or Windows ME.
- Download the Cisco Aironet client setup and diag utility ACUv415006.exe.
- Doubleclick the driver download and extract the files to c:\temp.
- Doubleclick the Aironet utilities download and extract the files to c:\temp2.
- Place the Cisco Aironet 350 into the PCMCIA slot. When the Add New Hardware Wizard pops up, click Next. Search for the driver and choose c:\temp. Click next to install the driver (you may need your windows cd to finish the driver installation)
- Install the client software. Go to c:\temp2. Run setup.exe. Use the default options and finish the install.
- Go to Start > Programs > Cisco Aironet
Click on Aironet Client Utility
Click on Commands > Edit Properties
Under SSID1 type in ukyedu
Under the Network Security tab, check the box marked: Allow Association To Mixed Cells
Click OK - Go to Start > Settings > Control Panel
Double-click on Network
Scroll down in the component list
Double-click TCP/IP > Cisco Systems 350 Series
Click on the IP address tab and make sure that "Obtain an IP address automatically" is selected. - Restart the laptop.
If you are near a wireless access point you should now be able to connect to the wireless network.